Gelişmiş Arama

Basit öğe kaydını göster

dc.contributor.authorYildiz, A.
dc.contributor.authorSerin, N.
dc.contributor.authorKasap, M.
dc.contributor.authorSerin, T.
dc.contributor.authorMardare, Diana
dc.date.accessioned2019-11-24T20:37:38Z
dc.date.available2019-11-24T20:37:38Z
dc.date.issued2010
dc.identifier.issn0925-8388
dc.identifier.urihttps://dx.doi.org/10.1016/j.jallcom.2009.12.061
dc.identifier.urihttps://hdl.handle.net/20.500.12513/2393
dc.descriptionWOS: 000276054200054en_US
dc.description.abstractIn this paper we made a study on the effect of films thickness on the electrical conduction properties of nanostructured TiO(2) thin films deposited by d.c. reactive sputtering. The deposition was performed on heated (573 K) glass substrates, using water vapor as reactive gas. The electrical conductivity of the films was investigated in the temperature range 13-320K. The temperature dependence of electrical conductivity between 80 and 320 K indicated that electrical conductivity in the films was controlled by potential barriers caused by depletion of carriers at grain boundaries in the material. Values of grain barrier heights and surface trap density at the grain boundaries were extracted from the high temperature data for the investigated samples. Both the grain barrier heights and surface trap density at the grain boundaries were found to depend significantly on film thickness into the deposition process. The low-temperature (T < 80 K) conductivity of the films was described in terms of variable-range hopping (VRH) conduction. Characteristic parameters describing the low-temperature conductivity, such as the hopping distance, hopping energy and density of states were determined, and their values as a function of film thickness were discussed in the light of variable-range hopping conduction model. (C) 2009 Elsevier B.V. All rights reserved.en_US
dc.description.sponsorshipTUBITAKTurkiye Bilimsel ve Teknolojik Arastirma Kurumu (TUBITAK); ANCSTurkiye Bilimsel ve Teknolojik Arastirma Kurumu (TUBITAK) [TBAG-U/220 (107T584), 17CB/2008]; BiDEBTurkiye Bilimsel ve Teknolojik Arastirma Kurumu (TUBITAK)en_US
dc.description.sponsorshipOne of the authors (D. Mardare) is very indebted to Professor F. Levy from Institute of Applied Physics, Polytechnic Federal School of Lausanne, Switzerland for providing the necessary laboratory facilities to carry out a part of this investigation. The authors would also like to thank N. Cornei and G.I. Rusu from "Al.I.. Cuza" University, Iasi, Romania. This work was supported by TUBITAK and ANCS under project no. TBAG-U/220 (107T584) and 17CB/2008. Abdullah Yildiz acknowledges 2218 coded national research scholarship from BiDEB.en_US
dc.language.isoengen_US
dc.publisherELSEVIER SCIENCE SAen_US
dc.relation.isversionof10.1016/j.jallcom.2009.12.061en_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectTiO(2)en_US
dc.subjectElectrical propertiesen_US
dc.subjectVariable-range hopping (VRH) conductionen_US
dc.subjectGrain boundaryen_US
dc.subjectThicknessen_US
dc.titleThe thickness effect on the electrical conduction mechanism in titanium oxide thin filmsen_US
dc.typearticleen_US
dc.relation.journalJOURNAL OF ALLOYS AND COMPOUNDSen_US
dc.contributor.departmentKırşehir Ahi Evran Üniversitesi, Fen-Edebiyat Fakültesi, Fizik Bölümüen_US
dc.identifier.volume493en_US
dc.identifier.issue1.Şuben_US
dc.identifier.startpage227en_US
dc.identifier.endpage232en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US


Bu öğenin dosyaları:

Thumbnail

Bu öğe aşağıdaki koleksiyon(lar)da görünmektedir.

Basit öğe kaydını göster