Yayın Koleksiyonu
Güncel Gönderiler
-
Quantifying climate change impacts on hydropower production under CMIP6 multi-model ensemble projections using SWAT model
(Taylor & Francıs Ltd, 2023)This study assesses the effects of climate change on hydropower production in the most threatened highlands region of the Euphrates-Tigris Basin, with the case of the Dipni Project. This evaluation is based on the precipitation ... -
Investigation of thermal performance of double-layered thermally activated building system in heating mode
(SAGE Publications Ltd, 2021)Main principle of the thermally active building system (TABS) which is a type of radiant heating system operating at low temperatures range as 30–50 ˚C is to bring the ambient temperature to the desired level by heating ... -
Extreme Rainfall Indices Of Ankara: Trends From Historical To Future
(Parlar Scıentıfıc Publıcatıons (P S P), 2021)The frequency and the severity of extreme events arc increasing. In 2019, 935 new extreme events were detected in Turkey, with the most hazardous being heavy rain, floods, and windstorms. Ankara, the capital of Turkey, is ... -
Performance of bias corrected monthly CMIP6 climate projections with different reference period data in Turkey
(Springer Science and Business Media Deutschland GmbH, 2022)Decisions that are based on the future climate data, and its consequences are significantly important for many sectors such as water, agriculture, built environment, however, the performance of model outputs have direct ... -
Quantile trends of subhourly extreme rainfall: Marmara Region, Turkey
(Sprınger Int Publ Ag, 2021)Global climate change will probably cause intensification of the hydrologic cycle, which can lead to alterations in extreme precipitation properties. In this study, we investigated the trend of 5-, 10-, 15-, and 30-min ... -
Non-stationary investigation of extreme rainfall
(Salehan Institute of Higher Education, 2021)Natural or human-induced variability emerged from investigation of the traditional stationary assumption regarding extreme precipitation analyses. The frequency of extreme rainfall occurrence is expected to increase in the ... -
Role of inclusion size distribution of titanium dioxide on the nitrogen oxides reduction capability and microstructural characteristics of cementitious systems
(Elsevier Ltd, 2022)This paper explores the effect of the inclusion size of titanium dioxide (TiO2) particles on a variety of performance properties of cementitious systems via experimental studies. In addition to comprehensive microstructural ... -
Influence of mixing methods on the NOx reduction capability and electrical properties of photocatalytic cementitious systems
(Elsevier Ltd, 2021)Nitrogen oxides (NOx), regarded as toxic air pollutants, are a group of highly reactive and hazardous gases encompassing compounds ranging from nitrous to nitric acid. Especially in crowded cities, the release of these ... -
Effects of Mixture Design Parameters on the Mechanical Behavior of High-Performance Fiber-Reinforced Concretes
(American Society of Civil Engineers (ASCE), 2020)The main purpose of this research is to assess the influence of different design parameters on the mechanical performance of high-performance fiber-reinforced concrete (HPFRC) mixtures. Special attention is also paid to ... -
Investigation of the Effect of Climate Change on Extreme Precipitation: Capital Ankara Case
(Turkish Chamber Civil Engineers, 2022)This study examines the potential impacts of climate change on extreme precipitation. Rainfall analysis with stationary and nonstationary approach for observed and future conditions is performed for (1950-2015 period) ... -
Nano-tailored TiO2-based photocatalytic cementitious systems for NOx reduction and air cleaning
(Elsevier, 2022)Air quality is one of the main factors having incontestable effect on the quality of life of every being on earth. In addition to its effect on the public health, low air quality also has an indispensable negative effect ... -
Fresh and Hardened Properties of Cementitious Composites Incorporating Firebrick Powder from Construction and Demolition Waste
(MDPI, 2023)Firebricks are generally used in furnace basins where glass, ceramics, and cement are produced. Firebricks have an important place in construction and demolition waste (CDW). However, there is a limited understanding of ... -
Torsional ductility spectrum for predicting ductility distribution in simple asymmetric-plan structures
(John Wiley and Sons Ltd, 2021)An analytical procedure is developed for predicting the ductility demands in simple asymmetric-plan structures under earthquake ground motions. The procedure governs regular structures dominated by the lower vibration modes ... -
Mechanical properties and microstructure of cement multicomponent systems containing pozzolan materials under sulfate attack
(Stowarzyszenıe Producentow Cementu, 2020)Sulfates are a significant chemical components that may lead to failures of cement concrete composites. The present study is dedicated to analyzing the effects of sulfate on the microstructure of cement composite mortars. ... -
Electrical testing for the assessment of self-healing and self-sensing capability of cementitious composites
(Associated Cement Companies Ltd., 2019)Engineered Cementitious Composites (ECC) is regarded as a multifunctional smart material due to its intrinsic autogenous self-healing and self-sensing attributes. Here, recent findings related to the utilization of electrical ... -
Assessing the impact of topography and land cover data resolutions on two-dimensional HEC-RAS hydrodynamic model simulations for urban flood hazard analysis
(Springer, 2020)This study assesses the effects of topography and land cover data resolutions on the estimates of flood extent, inundation depths, flow velocities, and arrival times of a two-dimensional (2D) hydrodynamic HEC-RAS model ... -
Extreme precipitation indices trend assessment over Thrace region, Turkey
(Springer International Publishing Ag, 2021)The frequency and the severity of extreme weather events are increasing globally and will continue to do so in the coming decades as a consequence of our changing climate. Understanding the characteristics of these events ... -
Rheological properties and compressive strength of construction and demolition waste-based geopolymer mortars for 3D-Printing
(Elsevier, 2022)Entirely construction and demolition waste (CDW)-based ambient-cured geopolymer mortars with rheological properties fitted for 3-dimensional additive manufacturing (3D-AM) were developed in an effort to combine the advantages ... -
Construction and demolition waste-based geopolymers suited for use in 3-dimensional additive manufacturing
(ELSEVIER, 221)This paper focuses on the evaluation of ambient-cured 100% construction and demolition waste (CDW)-based geopolymers in terms of rheological properties for 3-dimensional additive manufacturing (3D-AM). The CDW- based ... -
Strengthening with carbon fiber reinforced polymer and glass fiber reinforced polymer of insufficient bending rigidity simple rectangular beams
(2011)The reinforcement of rectangular sectioned and simple supported beams, with carbon and glass fibers against the bending strength was examined in this study. Reinforcement of the reinforced concrete beams with Carbon Fiber ...
RSS 1.0
