Başlık için Kaman Meslek Yüksekokulu listeleme
Toplam kayıt 112, listelenen: 1-20
-
An ab initio Study of Cr and Mn Doped MAX Phase TiMSiB
(Institute of Electrical and Electronics Engineers Inc., 2019)MAX phases, which are widely studied experimentally and theoretically, have general formula of M(n1)AXn, where M is transition metals, A is A group element and X is C and N. In this study, the structural, mechanical and ... -
An ab initio study on the investigation of structural, electronic, mechanical and lattice dynamical properties of the M(2)AX type MAX phases Sc2AlB0.5C0.5, Sc2AlB0.5N0.5 and Sc2AlC0.5N0.5 compounds
(IOP PUBLISHING LTD, 2017)The hypothetical Sc2AlB0.5C0.5, Sc2AlB0.5N0.5 and Sc2AlC0.5N0.5 compounds are M(2)AX type MAX phases referred to as #211 and have hexagonal crystal structure which conforms to P6(3)/mmc space group. These compounds have ... -
Ahi Evran Üniversitesi Kaman meslek yüksekokulu öğrencilerinin sosyo-ekonomik düzeylerinin belirlenmesi
(2009)Çağımızda kaliteli üretimi gerçekleştirebilecek, bilimsel ve teknolojik gelişmeye uyum sağlayabilecek, iş hayatının ihtiyaç duyduğu yüksek nitelikli tekniker ve meslek elemanlarını yetiştirecek eğitim sisteminin sahip ... -
Anisotropic elastic and vibrational properties of Ru2B3 and Os2B3: a first-principles investigation
(IOP PUBLISHING LTD, 2016)The structural, mechanical and lattice dynamical properties of Ru2B3 and Os2B3 have been investigated by using a first-principles method based on the density functional theory within the generalized gradient approximation. ... -
Anisotropic mechanical properties of Tl4Ag18Te11 compound with low thermal conductivity
(Academic Press Inc., 2020)The anisotropic mechanical properties of Tl4Ag18Te11 compound was investigated elaborately for the first time by using Density Functional Theory calculations with the Vienna Ab-initio Simulation Package in this work. ... -
Bioactive and Functional properties of gelatin peptide fractions obtained from sea bass (Dicentrarchus labrax) skin
(Sociedade Brasileira de Ciencia e Tecnologia de Alimentos, SBCTA, 2022)Fish skin is one of the most common resources of gelatin, which can be hydrolyzed bioactive peptides. In this study, gelatin from sea bass skin (SBS) was hydrolyzed with flavourzyme to obtain peptide fractions with ... -
The bioactive efficiency of ultrasonic extracts from acorn leaves and green walnut husks against Bacillus cereus: a hybrid approach to PCA with the Taguchi method
(SPRINGER, 2019)The objective of this study was to investigate the usefulness of the hybrid approach using the Taguchi method (TM) and principal component analysis (PCA) in determining the optimum conditions for ultrasonic extracts of ... -
Characterization of Grape Molasses/Sesame Paste/Honey Blends: Multiple Response Optimization of Some Physicochemical, Bioactive, Viscoelastic and Sensory Properties
(WILEY, 2017)In this study, blends of grape molasses, sesame paste and honey were prepared at different ratios according to the mixture design and some physicochemical, rheological, bioactive and sensory properties of final blends were ... -
Covert marketing strategy: An alternative way to reach consumers
(Peter Lang AG, 2015)[No abstract available] -
Density functional theory (DFT) study of BaScO3H0.5 compound and its hydrogen storage properties
(CANADIAN SCIENCE PUBLISHING, 2019)BaScO3 and its hydride BaScO3H0.5 have been investigated using density functional theory (DFT) with the generalized gradient approximation (GGA). BaScO3 perovskite can crystallize in five possible crystal structures: ... -
Determination of compressive strength of perlite-containing slag-based geopolymers and its prediction using artificial neural network and regression-based methods
(Elsevıer Scı Ltd, 2022)This study has two main objectives: (i) to investigate the parameters affecting the compressive strength (CS) of perlite-containing slag-based geopolymers and (ii) to predict the CS values obtained from experimental studies. ... -
Determination of optimum working condition and development of cuttability abacus for a limestone and real marble sample in diamond wire cutting
(2011)Diamond wire cutting is the most applied method in natural stone quarry for block production. The most important parameters in diamond wire cutting performance are the wearing on diamond beads and cutting rate. Measuring ... -
Development of cuttability abacus for granite sample in diamond wire cutting [Bir granit numunesi için elmas tel kesme yönteminde kesilebilirlik abagi{dotless}ni{dotless}n geliştirilmesi]
(Chamber of Mining Engineers of Turkey, 2013)The aim of this study is to determine optimum working conditions and to develop cuttability abacuses in diamond wire cutting with single bead test machine for a granite sample. The rock samples used in cuttings were prepared ... -
Development of cuttability abacuses in diamond wire cutting method on limestone sample
(Korza Matbaacilik, 2011)The purpose of this study is to develop cuttability abacuses in diamond wire cutting method with single bead test machine on limestone sample. Therefore, single bead test machine that can best reflect the field conditions ... -
Development of defective fish egg sorting machine with colour sensor for trout facilities
(WILEY, 2018)The most important problem at the top of the list faced by trout producers is broken eggs. In this study, a further improved machine that is capable of distinguishing defective eggs from good ones with colour sensors is ... -
DFT-based ab-initio study of half-Heusler KCaP compound
(NATL INST OPTOELECTRONICS, 2018)An ab-initio study of structural, elastic, electronic and optical properties of KCaP compound with space group F (4) over bar 3m have been reported using the plane-wave pseudo-potential technique based on density functional ... -
Drying of Tomato in a Photovoltaic and Thermal Solar-Powered Continuous Dryer
(ANKARA UNIV, FAC AGR, 2012)In this study, a solar energy dryer capacity of 10 kg has been designed, manufactured and analyzed by drying tomato. The developed dryer has been used to dry the tomatoes at the different conditions. The necessary electricity ... -
Drying of tomato in a photovoltaic and thermal solar-powered continuous dryer [Fotovoltaik ve termal güneş enerjili sürekli bir kurutucuda domates kurutulmasi{dotless}]
(2012)In this study, a solar energy dryer capacity of 10 kg has been designed, manufactured and analyzed by drying tomato. The developed dryer has been used to dry the tomatoes at the different conditions. The necessary electricity ... -
Effect of Hydrogen Doping to MgTiH3 Perovskite Type Hydride to Enhance Hydrogen Storage Properties
(Institute of Electrical and Electronics Engineers Inc., 2019)MgTiH3 perovskite type hydride has been investigated for the hydrogen doping effect using the first principles calculation with the Vienna Ab-initio Simulation Package. The hydrogen doping positions have been determined ... -
The effect of hydrogen on the electronic, mechanical and phonon properties of LaMgNi4 and its hydrides for hydrogen storage applications
(PERGAMON-ELSEVIER SCIENCE LTD, 2018)Density functional theory calculations are used herein to explore the effect of hydrogen on the electronic, mechanical and phonon properties of LaMgNi4 and its hydrides. The polycrystalline elastic moduli, Poisson's ratios ...
