Torsional ductility spectrum for predicting ductility distribution in simple asymmetric-plan structures
Künye
Sucuoğlu, H., & Kaatsız, K. (2021). Torsional ductility spectrum for predicting ductility distribution in simple asymmetric‐plan structures. Earthquake Engineering & Structural Dynamics, 50(2), 538-559.Özet
An analytical procedure is developed for predicting the ductility demands in simple asymmetric-plan structures under earthquake ground motions. The procedure governs regular structures dominated by the lower vibration modes where inelastic response occurs only at the bases of first story columns and at the beam ends, in conformance with the capacity design principles. Torsional ductility spectra are generated for expressing the maximum ductility response of torsionally coupled, generic, single-story, 2-degree-of-freedom inelastic parametric systems. Five parameters characterize the parametric systems: first mode period, uncoupled frequency ratio, stiffness eccentricity, stiff-to-flexible edge strength ratio, and ductility reduction factor. A surrogate modeling approach is developed for converting the properties of the actual systems to those of the parametric system. Mean maximum ductilities of torsionally stiff, equally stiff, and torsionally flexible systems are calculated under a set of design spectrum compatible strong motions for the possible combinations of characteristic parameters. The results obtained from case studies revealed reasonable accuracy of the estimations. The results have indicated that the flexible side frames of torsionally stiff and equally stiff code conforming designs are mainly responsible for providing the intended ductility and energy dissipation capacity whereas the stiff side frames play a secondary role, particularly when the stiff edge is significantly stronger than the flexible edge. However, ductility demands in torsionally flexible systems are significantly larger at both sides compared with torsionally stiff systems. © 2020 John Wiley & Sons, Ltd.
Kaynak
Earthquake Engineering and Structural DynamicsCilt
50Sayı
2Koleksiyonlar
İlgili Öğeler
Başlık, yazar, küratör ve konuya göre gösterilen ilgili öğeler.
-
Structural, electronic and vibrational properties of ordered intermetallic alloys CoZ (Z=Al, Be, Sc and Zr) from first-principles total-energy calculations
Ugur, S.; Iyigor, A.; Charifi, Z.; Baaziz, H.; Ellialtioglu, M. R. (TAYLOR & FRANCIS LTD, 2013)Self-consistent band calculations on four intermetallic compounds of the CsCl structure are presented. The calculations were performed employing the self-consistent ultrasoft pseudopotential method based on the density ... -
The First Principle Study of Ni2ScGa and Ni2TiGa
Ozduran, Mustafa; Turgut, Kemal; Arikan, Nihat; Iyigor, Ahmet; Candan, Abdullah (AMER INST PHYSICS, 2014)We computed the electronic structure, elastic moduli, vibrational properties, and Ni2TiGa and Ni2ScGa alloys in the cubic L2(1) structure. The obtained equilibrium lattice constants of these alloys are in good agreement ... -
Structural, elastic, electronic and phonon properties of scandium-based compounds ScX3 (X = Ir, Pd, Pt and Rh): An ab initio study
Arikan, N.; Iyigor, A.; Candan, A.; Ugur, S.; Charifi, Z.; Baaziz, H.; Ugur, G. (ELSEVIER SCIENCE BV, 2013)Self-consistent band calculations on four compounds of the L1(2) structure are presented. The structural, elastic, electronic and phonon properties of ScX3 (X = Ir, Pd, Pt and Rh) compounds within density functional theory ...